7 Steps to Make RS232 ExpressCard Download Flash to 218X
Step One: Install CCS2.2 as well as check your RS232 Interface
To safeguard which your source formula can be gathered to download Source: xxx.out file.
Step two: Install Serial Programming Algorithm plan file: sdf28xx_v3_0_serial some-more information, greatfully review a included: SDFlash_Serial_RefGuide_v3_0.pdf as well as Expresscard RS232.pdf files.
Step Three: In a algorithm set up a plan file, a analogous time frequency, as well as generates. 1 SDFLASH 1.63 download, sequence download support. 2 SDFLASH algorithm libraries
(1) In a CC record to import F2812SerialFlash.pjt
File directory: C: \ CCStudio_v3.1 \ specdig \ sdflash \ mydrivers \ DSP281x_v3_0 \ DSP281x_serial \ set up \ F28xxSerialFlash
(2) set up your aim house time magnitude of a analogous
The Flash280x_API_Config.h a analogous PLL clock, we operate a 20M clear Chun chose: conclude CPU_RATE 10.000L / / for a 100MHz CPU time speed (SYSCLKOUT) (3) Save as well as accumulate a plan file, beget F2812SerialFlash.out record stored in: C: \ CCStudio_v3.1 \ specdig \ sdflash \ mydrivers \ DSP281x_v3_0 \ DSP281x_serial \ garbage bin
Note: Make certain your peep module space tangible in divide (in a CMD record changes). IF there is no RS232 Inteface,just implement a RS232 Expresscard sequence pier adapter.
Step four: Install SdFlashV1.60 or after
Fifth Step: Edit sdopts.cfg record which is stored in your designation of windows of a System32 office
(1) Use Notepad to open a approach sdopts.cfg.
(2) “# End of sdopts.cfg” prior to adding a following text:
[EmulatorId = C1]
EmuPortAddr = 0xC1
EmuPortMode = RS232
EmuProductName = SERIAL_FLASH
[EmulatorId = C2]
EmuPortAddr = 0xC2
EmuPortMode = RS232
EmuProductName = SERIAL_FLASH
[EmulatorId = C3]
EmuPortAddr = 0xC3
EmuPortMode = RS232
EmuProductName = SERIAL_FLASH
[EmulatorId = C4]
EmuPortAddr = 0xC4
EmuPortMode = RS232
EmuProductName = SERIAL_FLASH
Step six: Open SDFlash, according to a methods supposing by SDFlash_Serial_RefGuide_v3_0.pdf mention a record trail algorithm
In a Project settings, if we chose to operate a Personal Computer emulator of COM1 for a C1, COM2 name a C2
Seventh Step: The DSP-SCI_A as well as PC-RS232 port/Expresscard RS232 connection. Will be as follows DSP-foot blood vessel set to a analogous level, as well as afterwards reset
Reset time: GPIOF4 = 0 GPIOF12 = 0 GPIOF3 = 1 GPIOF2 = 1
Note: GPIOf4 for SCI_A TXD terminal, reset should be easy after a execution of a strange DSP is means to lift a vigilance state
Step seven: Click SdFlash menu Flash equipment — “Click Start, we can!!!. Check your RS232 or Expresscard 34 RS232 Serial Port can work normally!
Related posts:
